Packs-Racks-Baskets

Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds

PDW Bodega Basket features all-aluminum construction for all-weather durability. Easy-to-use Klickfix bracket securely holds rack to handlebars and allows easy removal for shopping. - Integrated lock holder

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed for use with our EXP Series Side-Load or Top-Load Dry Bags, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly, which is essential to any well-balanced bikepacking setup. - Includes Anything Cradle and two 30" Salsa EXP Series Rubber Straps - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

- Adventure ready saddle mounted removable drybag and holster system - Includes waterproof carry bag with air release valve to keep gear dry and compact - Bag easily slides in and out of holster without having to remove from bicycle - 15L measures 19.7

- Waterproof (IPX3) - Ajustable elatic buckle closure - Elastic mesh side pockets - Universal Bridge system - Mounting with 4 straps - Compatible with iRack, Carrymore and Racktime

- Trunk bag, waterproof (IPX3) - Elastic cord ontop and mesh side pockets - Removable and adjustable shoulder strap - Waterproof lining with roll top - Fastening: 4 straps at bottom - Compatible with iRack, Racktime and Carrymore system - 7L

Bike to hike and back again has never been easier. Based on the iconic Fjallraven Verdag backpack, the Cave Pack has been shaped to nestle into the Coolcave like an arctic fox in its den. Lift the pack out of the Coolcave and sling it on your back using the padded shoulder straps. Equipped with a padded laptop compartment and large and small pockets, the Specialized/Fjällräven Cave Pack organizes and protects your most important belongings. - 20L capacity. - Easy-access pocket. - Fully padded laptop compartment. - Large front pocket. - Easy-carry handles. - Compatible with Coolcave pannier.

Most of you don’t need the cargo capacity to land a helicopter on your rack. Sometimes, all you want to do is grab a sixer from the beer store on the way home or pick up a nice bouquet of flowers. For whatever the situation dictates, we offer the 8-Pack Rack. The 8-Pack Rack is a solid pedestal upon which you may rest a handlebar bag, grocery bag, minaudière, satchel…or whatever you use to carry your bowling ball around. The 8-Pack Rack attaches to most forks with mid-blade and crown eyelets. It uses stainless steel hardware (handily housed in a reusable Surly Tool Bag), and has the characteristic durability, versatility, and repairability all Surly products are known for. The 8-Pack Rack has lots of barrel braze-ons, so you can customize your cargo tie-downs…or just bolt on as many lights as you can. Rack Specifications: Color: Black or silver Weight Limit: 13.6kg (30lb) Finish: ED Coating + Powdercoat Rack Material: Tubular 4130 Chromoly Platform Dimensions: 270mm x 160mm

- Double bag, high-graded material - Main compartment with pull cord - Double side pocket - Topside with two bands for LED/straps/child's seat/spring clamp - Safety reflection - MIK system (pre-assembled MIK adpater plates snaps to any MIK rear carrier)

The perfect quick-mount front rack system for MTB suspension forks or rigid forks without rack eyelets. This one-size-fits-all front rack features an innovative top plate that adjusts to levels independently from the fork angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook-and-loop-strap mounting system cinches down tight to keep the load stable and allows mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags. - Attachments: Fork with hook-and-loop straps - Adjustment: Strut slots - Material: Aluminum / Engineering grade polymer / Nylon straps - Compatibility: Topeak MTX / RX TrunkBags, RackTime Snapit / Vario system bags - Max Load: 10kg / 22lb - Clamp for front reflector - Size: 37. 4 x 32.2 x 16.5cm / 14.7" x 12.7" x 6.5" - Weight: 910g / 2.01lb

The men's Syncline bike hydration pack is sized for everyday riding. The 12-liter pack has just the right amount of storage space for essential tools, snacks, and layers plus a lumbar reservoir that keeps the load low and stable. Our proven Air Flow back panel and shoulder strap designs deliver breathable comfort. - 3L / 100oz Dakine x Hydrapak 3D lumbar reservoir w/quick disconnect - High-flow Blaster bite valve w/shut-off and magnetic hose clip - Breathable Air Flow back panel and shoulder straps - DK Impact CE-certified Spine protector compatible (not included) - Front helmet attachment loops - Deployable armor carry straps - Fleece-lined sunglass pocket - Mesh side pocket - Internal organizer pockets - Safety light attachment - Integrated rescue whistle

The multifunctional Urban Back-Roller is an ideal single bag for bike riders who are looking for a spacious, waterproof bike bag to accompany them on their way to work or school. Made of a special blend of Cordura fabrics, the bag has a textile appearance that is a perfect match for both casual and business attire. Thanks to a polyurethane coating on the inside, it is nonetheless absolutely waterproof. The practical QL mounting system enables you to quickly and conveniently attach the bag to your bike rack. The bag's internal pocket, consisting of a main compartment and a zippered mesh compartment helps you to keep things orderly and immediately accessible. A detachable shoulder strap allows you to comfortably carry the Urban Back-Roller once you set off on foot. - Classical rear pannier (single) with roll closure - Sturdy soft-touch PU-laminated Cordura blend - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 or 12 mm with anti-scratch function preventing abrasion on the rack - Integrated inner pocket and shoulder strap - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Ideal for shopping, sports, picnic etc. - Two highly reflective 3M Scotchlite reflectors - Can be easily cleaned inside

The Frame-Pack RC Toptube is the solution for everyone who likes to have access to their water bottles while also carrying gear inside the bike frame triangle. This waterproof frame bag with roll closure is also ideal for full suspension mountain bikes, where space inside the frame's triangle is limited by the shocks. Part of ORTLIEB's bikepacking series, this bag with roll closure meets the IP64 standard for waterproofness, meaning your gear is fully protected from an involuntary bath. With its 4 liter volume, the Frame-Pack RC Toptube enables heavy equipment such as tent poles, tools or food to be carried within the frame triangle, maintaining the bike's low center of gravity. The customizable, sturdy, and strong Velcro fasteners enable simple and easy fastening and an uncomplicated installation. The frame pack RC Toptube is made in Germany and PVC-free. Together with the other products from the ORTLIEB bikepacking series, the frame pack RC Toptube forms the ideal equipment for an overnighter, a self-supported race, or your next big adventure. FEATURES: - Reflective logo on both sides of the bag

The Sport-Roller City is a streamlined economy version of the Sport-Roller Classic. The waterproof panniers for lowrider racks are also perfectly suitable as rear panniers for children’s and youth bikes because of their reduced size. The Ortlieb Quick-Lock1 system allows fast and easy single-handed mounting and removal of the panniers, and is suitable for racks with tube diameters up to 16mm. - Hook inserts for diameters of 8mm and 11mm are included -Sold as a pair

Load up and go! Salsa's Wanderlust HD Rear Rack is built from chromoly steel for real-world strength. A large deck teams up with multiple cross bars for securing panniers and other gear. To get you going, a mounting kit is included, and to help you stay visible, there's also a taillight mounting bracket.

Good news for all of those on the lookout for a convenient, waterproof bag to transport their belongings: the proven ORTLIEB "bike trunk" is now available with a Velcro roll closure! The closure of the Trunk-Bag RC (Roll-Closure) also serves as a convenient carrying handle. With a 12-liter payload and a shoulder strap, the waterproof bag that mounts on top of your bike rack is ideally suited for longer tours and brief forays to the supermarket. Even when the bag is fully loaded, your smartphone, wallet, and keychain remain quickly accessible thanks to the inside pocket and carabiner, as well as an additional, non-waterproof exterior pouch. The Rack-Lock Adapter, the winner of the Eurobike Award, ensures that the bag fits on virtually any bike rack with a width of 60 to 160 mm. Clip it on, secure it and remove it again. It's a snap!

Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g

The Elkhorn is a slender multi-tool of a rack. Stable and secure with 3-pack mounts on the uprights for your favorite cargo or bottle cages and more tie-down points on the deck than you could ever need. Front or rear compatible, the Elkhorn lets you feel the trail beneath you rather than the tail wag behind you. Old Man Mountain racks are the most versatile racks available. Capable of mounting to suspension forks, full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that's what you're into. Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter, cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - The Short fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is for maximum mud clearance and fits tires up to 29 x 3.25" - The Elkhorn comes in two sizes; Short and Tall. - The Short is designed for 27.5 and 700c wheels. Fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is designed for maximum mud clearance and bikes with 29" tires. Fits tires up to 29 x 3.25". - Front or rear mountable. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The rack is made from 1/2" (13mm) diameter tubing. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The Elkhorn comes standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Elkhorn has a load capacity of 25 lbs/11.34kg. - Rack weight (Short): 623 grams with 6" extenders. - Rack weight (Tall): 652 grams with 6" extenders. - Powder coated a sleek and refined shade of black. - If you want more precise fit information, the height from the mounting point to the deck is 390mm on the Short and 430mm on the tall. Be sure to leave room for debris and mud clearance. - Made in Taiwan. - Lifetime warranty

The Transit Backpack is a convertible backpack with enough space for the workday or weekend adventures. Organizational pockets keep everything in place while the large main compartment zips open for more than enough room for a change of clothes, footwear, and the day’s fuel. Transport your gear with the backpack straps, side carry handle, or easily mount to the Travoy lower deck for a bike cargo trailer experience. Features: - 28-liter main compartment with full zip opening for easy access of ample storage - Water-resistant fabric with a tarpaulin bottom for additional protection - Dedicated padded laptop compartment (up to 15.6") for safe and secure storage - Stowable shoulder straps with sternum strap tuck away when not in use - Stowable bag clips (4) for Travoy bike trailer connection - Side zip pocket is readily accessible for quick stops - Mesh side pocket for water bottle - Breathable back panel - Fleece-lined exterior zip pocket for quickly accessing smaller items - Front organization pocket including utility clip for keys keeps everything in its place - Interior zip pockets for smaller items - Top and side carry handles for easy grab and go - Light loop for accessory lighting - Compatibility: 2010 – Current Travoy Specifications: - Volume (Liters): 28 - Weight (lbs/kg): 2.18 / 0.99

Designed to give you the Low Rider advantage, the M.U.L.E. LR combines the storage and features of your favorite M.U.L.E. pack with a lumbar reservoir based design that offers more stability during aggressive downhill rides or backcountry terrain. Instead of concentrating pack weight on your shoulders, this pack shifts the load to your hips for a lower center of gravity and more freedom of movement. The M.U.L.E. LR is built around our top-of-the-line 3-liter Crux lumbar reservoir that delivers more water per sip. And, the separate reservoir compartment is optimized for fast and fumble-free refills, no matter how full the rest of your pack is. The flip down reservoir garage also gives access to the tool roll and rain cover, so repair and weather essentials are always within quick reach. Easy-access storage on the harness gives immediate access to essentials without removing the pack. - All the features of your favorite M.U.L.E. pack with a lumbar design that shifts your load for increased stability - 3-Liter CRUX LR Reservoir with Integrated Compression: Keeps your fluids low and tight for better balance and increased pack stability - Magnetic Tube Trap: Keeps your tube secure and accessible when you need it - Helmet Carry: Universal hooks to stow your helmet when not riding - Cargo Compression: Keep your gear close to your body for better balance and increased stability - Soft-Lined Pocket: Keep sunglasses or electronics safe and easy to access - Adjustable Sternum Strap: Custom fit for a wide variety of chest sizes - Reflectivity and Light Loop: For added visibility and safety - Gear Capacity: 12L/730 cu in

Our bestselling M.U.L.E. hydration pack has been part of your dependable support crew for years, but it was time for a tune-up. Enter the M.U.L.E. Pro 14. The same great pack you know and trust with the all-new Air Support Back Panel, plus a few essential additions to take your ride to the next level. Designed with body mapping technology to address areas that retain the most heat, maximum air flows across the back panel to provide comfortable cooling. A lightweight and breathable 3D vent mesh harness helps to keep your load light. A large capacity 3-liter Crux Reservoir, hip belt with cargo carry, and bike tool organizer makes it easy to plan for a full day's ride. Upgrade to max performance—this pack is also Impact Protector ready and e-bike battery compatible so you can go all out. - Air Support Pro Back Panel: Designed with body mapping technology to identify and ventilate the areas of the body that generate the most heat. Lightweight and breathable high pile mesh construction. - 3D Vent Mesh Harness: Lightweight and breathable with added cargo. Designed for all-day comfort. - Hip Belt With Cargo: Added stability and quick access to essentials - Helmet Carry: Stow and secure helmet - Integrated Tool Roll: Keep your CO2 cartridges, multi-tool, and tire levers safe and secure - Adjustable Sternum Strap: Offers a range of adjustments for a custom fit and increased stability - Impact Protection Ready: Compatible with the CamelBak Impact Protector (sold separately) - E-Bike Battery Sleeve: Securely and safely ride with a second e-bike battery for all-day adventures - Stretch Overflow Pocket: Quickly stash or shed an extra layer - Cargo Compression: Cinch down jackets or other items to keep the footprint small - Soft Lined Pocket: Keep your glasses or goggles safe and scratch-free - Magnetic Tube Trap Management: Keeps your tube secure and accessible when you need it - Reflectivity: For low-light safety - Light Loop: Clip on a light to make the ride to and from the trailhead safe - Armor Carry: Stow and secure knee and elbow pads on the climbs

The Drafter 10L meets all your mountain bike backpack needs from hydration to protection in a compact, breathable design. Stay hydrated on the move with the 3-liter Hydrapak reservoir, located on the lumbar for a lower center of gravity, with a high-flow bite valve. Stay cool and comfortable thanks to the air suspension back panel and breathable ergonomic shoulder straps. The organizer pocket features a home for all your tools, replacement parts, and necessities. Additional features include spine protection compatibility, an external helmet carry, plus deployable armor carry straps. - 3L / 100 oz Dakine x Hydrapak 3D lumbar reservoir w/quick disconnect - High-flow Blaster bite valve w/shut-off and magnetic hose clip - AirLite Suspension back panel - Breathable ergonomic shoulder straps w/sunglasses quick stash - Separate cargo and hydration compartments - Internal ebike spare battery storage system - Padded, fleece sunglasses/phone pocket - Internal organizer pockets - Deployable external carry straps - Front quick stash & compression panel - Reflective panel and safety light attach - DK Impact Spine protector compatible (not included)

The Drafter 10L Women's Backpack meets all your mountain bike backpack needs, combining all the best technical bike pack features in a low-profile, women's-specific silhouette. Stay hydrated on the move with the 3-liter Hydrapak reservoir, located on the lumbar for a low center of gravity, with a high-flow bite valve. Stay cool and comfortable thanks to the shorter torso length, Air Suspension back panel, and S-shaped breathable shoulder straps. The organizer pocket features a home for all your tools, replacement parts, and necessities. Additional features include spine protection compatibility, external helmet carry, and deployable armor carry straps. - Women's-specific fit - 3L / 100 oz Dakine x Hydrapak 3D lumbar reservoir w/quick disconnect - High-flow Blaster bite valve w/shut-off and magnetic hose clip - AirLite Suspension back panel - Breathable ergonomic shoulder straps w/sunglasses quick stash - Separate cargo and hydration compartments - Internal ebike spare battery storage system - Padded, fleece sunglasses/phone pocket - Internal organizer pockets - Deployable external carry straps - Front quick stash & compression panel - Reflective panel and safety light attach - DK Impact Spine protector compatible (not included)

ORTLIEB's frame bag with roll closure helps you start off your bike packing adventure well-prepared. Thanks to the waterproof roll closure —which is closed by three silicone rings— paired with the proven nylon fabric, your luggage inside the bag stays absolutely dry even in the most adverse conditions. The Frame-Pack RC is ideal for storing heavy luggage, such as tools or food, centrally on the bike. This maintains a low center of gravity so that the trail fun remains high even when fully loaded. The roll closure and its large opening allow easy access and easy packing of the bag. The assembly within the frame triangle is done with strong and robust Velcro fasteners. The specific positioning of the Velcro straps along the circumference of the bag enables individual adjustment to the dimensions of your bike. The Frame Pack RC is available in two sizes —4 and 6 liters — and suitable for mounting on carbon frames. The bag is PVC-free and sustainably made in Germany. FEATURES: - Reflective logo on both sides of the bag

The ORTLIEB Toptube Frame-Pack is the smart solution for all who want to use their frame's main triangle for storage space without having to do without their water bottle. The solution also works for those who have full-suspension mountain bikes with limited triangle space. With its 4-liter payload, the Toptube Frame-Pack provides plenty of space for heavy equipment such as tent poles, tools, and food supplies, while also helping to secure a low center for improved rising performance. And given that the bag and its zipper are waterproof, you can even cross rivers on your bikepacking tour without worrying about your stuff getting wet. The Frame-Pack attaches easily to your top tube and seat tube with the help of sturdy and highly adhesive Velcro straps. FURTHER FEATURES: - Ideal for all bikes with limited triangle space - Reflecting logo ADVICE: Suitable for carbon fiber frame.

The waterproof ORTLIEB Handlebar-Pack is an indispensable item when you're on a bikepacking tour in the great outdoors. This Handlebar-Pack offers a payload of 9 liters for your sleeping bag and pad. It also helps to secure a balanced distribution of gear and weight across your bike. Thanks to the roll closures at both ends, you can always gain quick access to your gear. Compression belts on the outside enable the stowing and attachment of additional equipment. Moreover, the Handlebar-Pack comes with four hooks to enable the attachment of an ORTLIEB Accessory-Pack for additional storage space. Consisting of spacers and two strong Velcro straps, the mounting system ensures secure attachment to any handlebar type, including carbon handlebars. The pack's stiffened interior and head-tube attachment offer additional stability – in any terrain. This 9L model belongs to the compact class of bikepacker handlebar rolls. With a length of only 40cm, this waterproof handlebar bag is the right choice for bikepackers with off-road drop bars and both racing and hybrid-style handlebars. This compact Handlebar-Pack is also extremely lightweight. FURTHER FEATURES: - Hooks for attaching an ORTLIEB Accessory-Pack - Also suitable for carbon handlebars - Mounting straps with convenient Velcro closures - Lightweight design - High luminosity 3M Scotchlite reflectors

There’s a right waterproof backpack for everyone: The Velocity PS! The courier-style daypack Velocity is a favorite in the ORTLIEB collection. What's new: Handy details, new color concept and perfect if you want to do without the conventional tarp looks, because Velocity PS comes in a sustainable PVC-free material and you can go with the new PU coated nylon fabric. Designed with the ORTLIEB Messenger Bag in mind, this compact backpack is the perfect choice for students, or commuters, for every day, school, sports, or work. Velocity PS is sturdy and waterproof. Its trademark, the foam ventilated back, ensures carrying comfort along with breathability. Both the foam back and the ergonomic shoulder straps are improved for increased carrying comfort. The waist strap is adjustable or can be easily removed. Easy access roll-top closure with hook and loop guarantees 100% waterproofness and makes packing speedy and simple. In case the hook and loop fastener wears out after years of intensive use, simply return your pack to our ORTLIEB customer service and we will give your Velocity a second life. All components can be easily exchanged or repaired which makes Velocity a sustainable and lifelong companion. What’s new on the inside? All Velocity backpacks now feature an internal zippered organizer and a padded laptop sleeve fixed at the base and top taking computers (max. 15.4") and keeping them safe and dry. The lower edge protectors resist abrasion and wear. A bike light or helmet can be fixed to the back. Like all ORTLIEB products, Velocity PS is sustainably made in Germany. FURTHER FEATURES: - Carrying handle - Waist and sternum strap, adjustable and removable - Zippered organizer with laptop sleeve

The Tempest 20 is the perfect panel-loading, day-hiking, biking or peak-bagging carry solution with a women's-specific fit. Featuring a continuous-wrap harness and hipbelt and injection-molded AirScape backpanel that moves as you move down the trail. Attachment for trekking poles, an ice axe, a bike helmet and blinky light make this lightweight pack one of the most versatile technical pack series ever created. Made from high-quality bluesign-approved recycled high-tenacity nylon. Airscape Suspension An injection-molded, die-cut foam AirScape backpanel creates a breathable, close-to-body fit. A flexible BioStretch harness and hipbelt, with a continuous lumbar-to-hipbelt wrap, allow for dynamic movement. Light and Fast A lightweight pack series designed with optimal stability for dynamic movement even on the most technical terrain. Multi-Sport From top-loaders to lumbar packs and everything in between, the Talon/Tempest Series accommodates the needs of hikers, bikers and more. Sustainable Materials Constructed with high-quality bluesign-approved recycled high-tenacity nylon. - Dual-zippered panel access to main compartment - Internal zippered mesh pocket with key clip - Tuck-away ice ax attachment with bungee tie-off - Stow-on-the-Go trekking pole attachment - Top panel zippered slash pocket - LidLock bike helmet attachment - Lower side compression straps - Side stretch mesh pockets - External hydration reservoir sleeve - Easy-access, expandable stretch mesh harness pocket - Dual-zippered fabric hipbelt pockets - Blinker light attachment (light not included) - Large stretch mesh front panel pocket Airscape Backpanel - Injection-molded AirScape framesheet with die-cut foam provides a close-to-body stable fit while offering flexibility and ventilated airflow channels for active use - Mesh-covered foam lumbar for lightweight and comfortable contact surfaces Biostretch Harness - Integrated BioStretch seams offer maximum flexibility without sacrificing stability for dynamic body movement - Spacermesh over die-cut foam provides breathable, comfortable contact surface - Harness system easily adjusts to fit various torso lengths - Adjustable sternum strap with safety whistle buckle Biostretch Hipbelt - Seamless lumbar-to-hipbelt body wrap and BioStretch seams offer maximum flexibility without sacrificing stability for dynamic body movement - Spacermesh over die-cut foam provides breathable, comfortable contact surface Crossbody ErgoPull hipbelt system to pull lumbar into body

The Back-Roller City is an economical starter version with clear features and plenty of space for bike touring. With its symmetrical design and slanted shape on both sides, this classic Ortlieb bag provides enough space for pedaling, while also allowing individual use on either the left or right side of the bike. The patented Ortlieb QL1 system allows fast and easy single-handed mounting and removal of the panniers, and is suitable for racks with a tube diameter up to 16 mm (hook inserts for diameters of 8 and 11mm are included). -Sold as a pair

This carbon Mukluk specific frame bag incorporates the best features of our classic Ranger frame bag. This frame bag is for the 2017-2021 year models of the Salsa carbon Mukluk. Your frame size correlates to the frame bag size; a small fits a small carbon Mukluk. If you have an aluminum Mukluk, we recommend the Ranger. Features: - Revelate exclusive RevX-PAC panels that are 2 times as abrasion resistant as standard VX material. - Zipstretch construction pairs a bomber, wetsuit style molded-tooth zipper with our exclusive stretch Cordura panels that reduce zipper stress when closing bag. - Industry leading #10 Molded tooth zippers with urethane coated tape are basically impervious to dirt and grit that destroy more commonly used water resistant coil zippers. - Exit port in main compartment for hydration tube or wires. - Zippered left side pocket on sizes SM-XL. - Bags feature one main compartment with vertical divider. - Expanding taper front section for increased volume at head tube. - Stretch mesh internal pocket. - Front top tube attachments accommodate top tube packs. Weight: - SM: 11 oz - MD: 12 oz - LG: 13 oz - XL: 15 oz Materials: - RevX-Pac Fabric: Dimension Polyant VX-21 with proprietary abrasion resistant finish; 1050 denier domestic ballistics nylon; 420 denier diamond ripstop lining; closed cell foam padded tube sections. Made in the USA with domestic and imported materials. These frame bags are manufactured and distributed by Revelate Designs and have no affiliation with Salsa Cycles. Salsa Cycles is a trademark of Quality Bicycle Products.